Loading ...
Loading ...
Loading ...
Full editing of the Sounds |945
Setting the effect parameters
All the parameters in this page are the same seen in the Mixer section. Please
check The Insert and Master Effects on page 384.
> Use the Send Level knobs (0…127) next to the Master Effects to set the level
of the Sound going to the effect.
> Use the Routing > Send to FX1 knobs to route the corresponding master ef-
fect back to the input of Master FX1, and create a serial effect chain.
> Select the Direct Signal checkbox to add the dry signal to the effected signal.
If this is not selected, only the effected signal will be heard.
Loading ...
Loading ...
Loading ...