Loading ...
Loading ...
Loading ...
1064| Effects for the Sounds
▪ b: Wah Sweep Range
▪ b: Wah Sweep Src
This parameter sets the sweep range of the wah center frequency. A negative
value will reverse the direction of sweep. The wah center frequency can be con-
trolled by the modulation source specied in the “Wah Sweep Src” parameter.
▪ d: Pre Low-cut
Cutting the signal in the low range before it is input to the Distortion will create
a sharp distortion.
▪ d: Drive
▪ e: Output Level
The degree of distortion is determined by the level of input signal and the setting
of “Drive”. Raising the “Drive” setting will cause the entire volume level to in-
crease. Use the “Output Level” parameter to adjust the volume level. The “Output
Level” parameter uses the signal level input to the 3-Band EQ. If clipping occurs
at the 3-Band EQ, adjust the “Output Level” parameter.
Loading ...
Loading ...
Loading ...