Loading ...
Loading ...
Loading ...
1224| Effects for the Sounds
Scratch
This effect is applied by recording the input signal and moving the modulation
source. It simulates the sound of scratches you can make using a turntable.
Input
D-mod
Envelope Select
D
-mod
Envelope Control
Left
Right
FX Amt
FX Amt
FX Amt = 100: Mono In - Mono Out / FX Amt = 0: Stereo In - Stereo Out
+
Scratch
Direct
Mix
D
-mod
Rec Control
Scratch
a Scratch Source Off…Tempo Selects the modulation source for simulation control
b Response 0…100 Sets the speed of the response to the Scratch Src
c Envelope Select D-mod, Input Selects whether the start and end of recording is con-
trolled via the modulation source or the input signal
level
Src Off…Tempo Selects the modulation source that controls recording
when Envelope Select is set to D-mod
d Threshold 0…100 Sets the recording start level when Envelope Select is
set to Input
e Response 0…100 Sets the speed of the response to the end of recording
f Direct Mix Always On,
Always Off,
Cross Fade
Selects how a dry sound is mixed
g Wet/Dry Dry,
1:99…99:1, Wet
Balance between the wet and dry signal
Src Off…Tempo See the list of DMS (Dynamic Modulation Sources) at the
beginning of this part
Amt –100…+100 Amount of modulation source
Loading ...
Loading ...
Loading ...