Loading ...
Loading ...
Loading ...
1088| Effects for the Sounds
c Bass 0…100 Sets the bass (low range) level
Middle 0…100 Sets the middle (mid range) level
d Treble 0…100 Sets the treble (high range) level
Presence/Cut 0…100
Sets the presence (high-frequency tone).
With
VOX amps, it simulates the Top Cut on the
original AC30; with higher values, it cuts the
high frequencies more.
e Post P4EQ Thru, On Selects through or on for the equalizer
f Band1 Cutoff [Hz] 20…1.00k Sets the center frequency of
Band 1
Q 0.5…10.0 Sets Band 1’s bandwidth
Gain [dB] –18…+18 Sets the gain of Band 1
g Band2 Cutoff [Hz] 50…5.00k Sets the center frequency of
Band 2
Q 0.5…10.0 Sets Band 2’s bandwidth
Gain [dB] –18…+18 Sets the gain of Band 2
h Band3 Cutoff [Hz] 300…10.00k Sets the center frequency of
Band 3
Q 0.5…10.0 Sets Band 3’s bandwidth
Gain [dB] –18…+18 Sets the gain of Band 3
i Band4 Cutoff [Hz] 500…20.00k Sets the center frequency of
Band 4
Q 0.5…10.0 Sets Band 4’s bandwidth
Gain [dB] –18…+18 Sets the gain of Band 4
j Wet/Dry Dry, 1:99…99:1, Wet Balance between the wet and dry signal
Src Off…Tempo See the list of DMS (Dynamic Modulation
Sources) at the beginning of this part
Amt –100…+100 Amount of modulation source
▪ a: Amp Type
▪ d: Presence/Cut
If the Amp Type is VOX AC15…VOX AC30TB, this sets the attenuation of the high-
frequency range. For other types, this sets the boost of the high-frequency range.
This corresponds to the Cut knob control of amps made by the VOX Corporation.
Loading ...
Loading ...
Loading ...