Loading ...
Loading ...
Loading ...
924| Editing the Sounds
Also, the effect of these settings on the lter cutoff frequency depends by the
Velocity and Intensity parameters of the Filter > Modulation page.
Note-on
Note-off
Attack
Time
Start
Level
Decay
Time
Release
Time
Release
Level
Attack Level
The specified
cuto
ff
frequency
Sustain Level
Tim
e
Break
Point
Level
Slope
Time
> Use the Level parameters (-99…+99) to specify the amount of cutoff fre-
quency change.
EG Level Meaning
Start Change in cutoff frequency at the time of note-on.
Attack Change in cutoff frequency after the attack time has elapsed.
Break (Break Point) Change in cutoff frequency after the decay time has elapsed.
Sustain Change in cutoff frequency that will be maintained from after the slope
time has elapsed until note-off occur.
Release Change in cutoff frequency that will occur when the release time has
elapsed.
> Use the Time parameters (0…99) to specify the time over which the cutoff
frequency change will occur.
EG Time Meaning
Attack Time over which the level will change from note-on until the attack level
is reached.
Decay Time over which the level will change from the attack level to the break
point level.
Slope Time over which the level will change after the decay time has elapsed
until the sustain level is reached.
Release Time over which the level will change after note-on occurs until the re-
lease level is reached.
Loading ...
Loading ...
Loading ...