Loading ...
Loading ...
Loading ...
1208| Effects for the Sounds
h Wet/Dry Dry,
1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See the list of DMS (Dynamic Modulation Sources) at the
beginning of this part
Amt –100…+100 Amount of modulation source
▪ a: Mode
This parameter switches the pitch shifter operating mode. With Slow, tonal quality
will not be changed too much. With Fast, the effect becomes a Pitch Shifter that
has a quick response, but may change the tone. Medium is in-between these two.
If you do not need to set too much pitch shift amount, set this parameter to Slow.
If you wish to change the pitch signicantly, use Fast.
▪ b: Pitch Shift [1/2tone]
▪ b: Src
▪ b: Amt
▪ c: Fine [cents]
▪ c: Amt
The amount of pitch shift will use the value of the Pitch Shift plus the Fine value.
The amount of modulation will use the b: Amt value plus the c: Amt.
The same Modulation Source is used for both
Pitch Shift and Fine.
▪ e: Feedback Position
▪ f: Feedback
When Feedback Position is set to Pre, the pitch shifter output is again input to
the pitch shifter. Therefore, if you specify a higher value for the Feedback param-
eter, the pitch will be raised (or lowered) more and more each time feedback is
repeated.
If
Feedback Position is set to Post, the feedback signal will not pass through the
pitch shifter again. Even if you specify a higher value for the Feedback parameter,
the pitch-shifted sound will be repeated at the same pitch.
Loading ...
Loading ...
Loading ...