Loading ...
Loading ...
Loading ...
Effect parameters |1225
▪ a: Scratch Source
▪ b: Response
The Scratch Source parameter enables you to select the modulation source that
controls simulation. The value of the modulation source corresponds to the play-
back position. The Response parameter enables you to set the speed of the re-
sponse to the modulation source.
+ Max
Zero
Scratch!
D
-mod
– Max
JS X
Ribbon
JS+Y
JS–Y
etc…
Zero
+ Max
Scratch Source
Recorded Sound
Scratch Source
Startabac oition nd
▪ c: Envelope Select
▪ c: Src
▪ d: Threshold
When “Envelope Select” is set to D-mod, the input signal will be recorded only
when the modulation source value is 64 or higher.
When “Envelope Select” is set to Input, the input signal will be recorded only when
its level is over the Threshold value.
The maximum recording time is 2,730msec. If this is exceeded, the recorded data
will start being erased from the top.
▪ e: Response
This parameter enables you to set the speed of the response to the end of record-
ing. Set a smaller value when you are recording a phrase or rhythm pattern, and
set a higher value if you are recording only one note.
Loading ...
Loading ...
Loading ...