Loading ...
Loading ...
Loading ...
1550| Shortcuts, Solutions, Specs
Problem Solution
The selected Style or Song
cannot start
Make sure that the Clock parameter is set to Internal (in the
Settings > MIDI > General Controls page). If you are using the
MIDI Clock of another device (like a sequencer), you must set
the MIDI Clock parameter to MIDI or USB, and make sure that
the external device transmits MIDI Clock data.
Does not respond to MIDI
messages
Make sure that the MIDI or USB cable is connected correctly.
Make sure that the external device is transmitting through MIDI
channels enabled to receive in Pa5X.
Make sure that the MIDI IN Filters do not prevent the reception
of messages.
Percussive instruments are
not played correctly
Make sure that the Drum track is set to Drum mode (in the Home
> Track Control > Mode page) and the external device has not
transposition applied.
A background noise can
be heard after selecting a
Keyboard Set, Style or Song
Check if the selected Keyboard Set, Style or Song did recall
the effect ‘Stereo Analog Record’, simulating the noise of a old
vinyl recording.
File related problems
Cannot format a device Check if the USB cable is correctly connected.
Check if the USB device is correctly powered.
Check if the device is inserted correctly.
Check if the drive or card is protected. Unprotect it.
Cannot save data to a device Check if the device is correctly formatted.
Check if the device is inserted correctly.
Check if the drive or card is protected. Unprotect it.
Cannot load data from a
device
Check if the device is inserted correctly.
Check if the device contains data compatible with Pa5X.
The message ‘Over Current
Condition Detected on USB
port: please remove the USB
media’ appears in the display
The USB device is probably defective, due to a short circuit, and
cannot be used.
Loading ...
Loading ...
Loading ...