Loading ...
Loading ...
Loading ...
Effect parameters |1189
2 Voice Resonator
This effect resonates the input signal at a specied pitch. You can set the pitch,
output level, and pan settings for two resonators individually. You can control the
resonance intensity via an LFO.
Left
Right
Resonance
FX Amt
FX Amt
FX Amt = 100: Mono In - Stereo Out / FX Amt = 0: Stereo In - Stereo Out
High Damp
High Damp
Trim
Trim
+
Level
Level
Pan
Pan
Control Mode
D
-mod
LFO
Manual
Invert: On/Off
Resonator
Resonator
Pitch, Fine [cents]
a Control Mode Manual, LFO,
D-mod
Switches the controls of resonance intensity
LFO/D-mod
Invert
Off, On Reverses the Voice 1 and 2 control when LFO/D-mod
is selected
b LFO Frequency
[Hz]
0.02…20.00 Sets the speed of the LFO
D-mod Src Off…Tempo Selects the modulation source that controls resonance
intensity
c MIDI Sync Off, On When this is on, the LFO speed is set by BPM, Base
Note, and Times, instead of Frequency
BPM MIDI,
40.00…300.00
MIDI syncs to the system tempo; 40–300 sets the tem-
po manually for this individual effect
Base Note
…
Selects the type of notes that specify the LFO speed
Times x1…x32 Sets the number of notes that specify the LFO speed
d Mod. Depth –100…+100 Sets the amount of resonance intensity control via
LFO/D-mod
Trim 0…100 Sets the input level at the resonator
e Voice1: Pitch C0…B8 Sets the voice1 Pitch for resonance
Fine [cents] –50…+50 Fine-adjusts the voice 1 pitch for resonance
Level 0…100 Sets the Voice1 output level
Loading ...
Loading ...
Loading ...