Loading ...
Loading ...
Loading ...
Full editing of the Sounds |887
Trigger Mode (How) Meaning
Cycle 1 All oscillators with this same trigger mode assigned will play in cycle.
For example, if Oscillators 1, 2 and 4 are assigned the Cycle 1 trigger
mode, the following note will trigger Oscillator 1, then 2, then 4, then
1 again.
Hint: This is especially useful to trigger different sound nuances or cre-
ate vector-like sound sequences.
Cycle 2 As the above, for use with a different (and parallel) group of oscillators.
Having two Cycle Trigger Modes allows for cycling stereo multisamples.
Random As the above, but with a random selection of oscillators within the as-
signed group.
▪ Choosing a delay before note start
> Use the Delay parameter to set a lapse (0…5000ms) between pressing a key
(or in general triggering the oscillator) and hearing the beginning of the sound.
▪ Reversing the controllers
> Select the OSC Off (when Sound Controllers are On) checkbox to reverse
the way Sound Controllers work. With this parameter checked, the current oscil-
lator will not play when one of the Sound Controllers (Sound Controller 1, Sound
Controller 2, Sound Controller 3, Sound Controller Y+, Sound Controller Y-) is
activated.
It should be applied to oscillators with the After Touch, Joystick Y+, Joystick
Y-, Normal, Legato, Legato Up, Legato Down, Not Legato, Cycle 1, Cycle 2, and
Random trigger modes, that can be turned off by using a switch, footswitch or the
joystick programmed as a Sound Controller.
Loading ...
Loading ...
Loading ...