Loading ...
Loading ...
Loading ...
1104| Effects for the Sounds
CX-3 Amp
This is a detailed model of the amp of a classic tone wheel organ. With the addi-
tion of the 3 band EQ, this amp simulation will allow you to create a very versatile
distortion. This amp model is especially suitable for organ sounds.
You can select one of two amp models, or a direct line out from the organ’s pre-
amp. Type 1 is a standard powered amp for organ, producing a warm, fat tone. Type
2 yields a less colored tone, with more high frequencies than Type 1. Preamp is
the sound of a direct line out from the organ, without the amp gain (but with all
the other controls).
AMP
a Type Amp Type 1, 2, Preamp Type of amp model. Pre Amp bypasses
the amp gain.
Gain 0…100 Sets the gain when Type is set to Type
1 or Type 2. It does not apply if the Amp
Type is set to Pre Amp.
You can use an Expression pedal to con-
trol the amount of overdrive and distor-
tion. With higher Gain values, you can
reach heavy distortion; with Gain = 0,
the amp will always remain clean.
Src Off…Tempo Selects the modulation source for the
gain level
Amt –100…+100 Amount of modulation source
EQ
b Bass –10…+10 Adjusts the bass frequencies.
Middle –10…+10 Adjusts the middle frequencies.
Treble –10…+10 Adjusts the high frequencies.
OUTPUT
c Level 0…100 Sets the output level
Src Off…Tempo Selects the modulation source for the
output level
Amt –100…+100 Amount of modulation source
EXPRESSION
d Minimum 0…100 Minimum allowed value
Expression 0…100 Starting value
Src Off…Tempo Selects the modulation source for the
Expression level
Expression Mode Add The Expression pedal will working to-
gether with the set Expression param-
eter
Loading ...
Loading ...
Loading ...