Loading ...
Loading ...
Loading ...
1318| Effects for the Sounds
f Horn/Rotor
Balance
Rotor, 1…99,
Horn
Sets the level balance between the high-frequency horn
and low-frequency rotor
g Mic Distance 0…100 Sets the distance between the microphone and rotary
speaker
Mic Spread 0…100 Sets the angle of left and right microphones
h Wet/Dry Dry,
1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See the list of DMS (Dynamic Modulation Sources) at the
beginning of this part
Amt –100…+100 Amount of modulation source
▪ a: Mode
This parameter sets how the modulation source switches between rotation and
stop.
When
Mode = Toggle, the speaker rotates or stops alternately each time you press
the pedal or move the joystick. Via MIDI, rotation will switch between start and
stop each time the modulation amount exceeds 64.
When
Mode = Moment, the speaker rotates by default, and stops only when you
press the pedal or move the joystick. Via MIDI, modulation values above 64 make
the speaker rotate, and values below 64 make it stop.
▪ b: Speed Switch
This parameter controls how the rotation speed (slow and fast) is switched via the
modulation source.
When
Mode = Toggle, the speed will switch between slow and fast each time you
press the pedal or move the joystick. Via MIDI, the speed will switch each time the
modulation amount exceeds 64.
When
Mode = Moment, the speed is usually slow. It becomes fast only when you
press the pedal or move the joystick. Via MIDI, modulation values above 64 set
the speed to Fast, and values below 64 set it to Slow.
▪ c: Manual Speed Ctrl
If you wish to control the rotation speed manually, instead of switching between
Slow and Fast, select a modulation source in the Manual Speed Ctrl parameter. If
you don’t want to use manual control, set this to Off.
Loading ...
Loading ...
Loading ...