Loading ...
Loading ...
Loading ...
Effect parameters |1147
e Feedback
(C Delay)
–100…+100 Sets the feedback amount of TapC
Src Off…Tempo Selects the modulation source for the TapC feed-
back
Amt –100…+100 Sets the modulation amount of the TapC feedback
f High Damp [%] 0…100 Sets the damping amount in the high range
Low Damp [%] 0…100 Sets the damping amount in the low range
g Input Level Dmod [%] –100…+100 Sets the modulation amount of the input level
Src Off…Tempo Selects the modulation source for the input level
h Spread 0…50 Sets the width of the stereo image of the effect
sound
i Wet/Dry Dry,
1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See the list of DMS (Dynamic Modulation Sources)
at the beginning of this part
Amt –100…+100 Amount of modulation source
▪ a: Time Over?
You can set the delay time up to 10,920msec. If the delay time exceeds this limit,
the error message “OVER!” appears in the display. Set the delay time parameters
so that this message will not appear. “Time Over?” is only a display parameter.
Loading ...
Loading ...
Loading ...