Loading ...
Loading ...
Loading ...
1218| Effects for the Sounds
d MIDI Sync Off, On When this is on, the LFO speed is set by BPM, Base
Note, and Times, instead of Frequency
BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–300 sets the
tempo manually for this individual effect
Base Note
…
Selects the type of notes that specify the LFO speed
Times x1…x32 Sets the number of notes that specify the LFO
speed
e Depth 0…100 Sets the depth of the sampling frequency LFO
modulation
Src Off…Tempo Selects the LFO modulation source of the sampling
frequency
Amt –100…+100 Sets the LFO modulation amount of the sampling
frequency
f Resolution 4…24 Sets the data bit length
g Output Level 0…100 Sets the output level
Src Off…Tempo Selects the modulation source for the output level
Amt –100…+100 Sets the modulation amount of the output level
h Wet/Dry Dry,
1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See the list of DMS (Dynamic Modulation Sources)
at the beginning of this part
Amt –100…+100 Amount of modulation source
▪ a: Pre LPF
If a sampler with a very low sampling frequency receives very high-pitched sound
that could not be heard during playback, it could generate pitch noise that is un-
related to the original sound. Set “Pre LPF” to On to prevent this noise from being
generated.
If you set the “Sampling Freq” to about 3kHz and set “Pre LPF” to Off, you can
create a sound like a ring modulator.
▪ f: Resolution
▪ g: Output Level
If you set a smaller value for the “Resolution” parameter, the sound may be dis-
torted. The volume level may also be changed. Use “Output Level” to adjust the
level.
Loading ...
Loading ...
Loading ...