Loading ...
Loading ...
Loading ...
442| Digital Drawbars
Amplier
This is a detailed model of the amp of a classic tone-wheel organ, producing a
warm, fat tone. With the addition of the 3-band EQ, this amp simulation will allow
you to create a very versatile distortion.
Please note that these parameters can only be accessed if the CX-3 Amp effect
is selected.
Parameters Values Meaning
On/Off On, Off Use this switch to enable or disable the Amplier.
Gain 0…100 This adjusts the preamp gain, therefore the overdrive. With high-
er Gain values, you can reach heavy distortion; with Gain = 0, the
amp will always remain clean.
If an Expression pedal is connected, you can use it to control the
amount of overdrive and distortion (by assigning it the Drawbars
Overdrive function).
Bass -10…10 Adjusts the bass frequencies.
Middle -10…10 Adjusts the middle frequencies.
Treble -10…10 Adjusts the treble frequencies.
Level 0…100 Amp’s output level.
Master Effects (FX1-3)
You can use the FX1, FX2 and FX3 buttons to enable or disable the corresponding
send to the master effects.
Loading ...
Loading ...
Loading ...