Loading ...
Loading ...
Loading ...
Full editing of the Sounds |913
of the change is specied by St (Start Level Swing) and At (Attack Level Swing).
As you play more softly, the pitch change will be closer to the Pitch EG levels.
> Use the St (Start Level Swing) and the At (Attack Level Swing) parameters
to specify the direction of change in Level > Start and Level > Attack caused by
the AMS.
If the Intensity is a positive (+) value, a setting of + will increase the EG level, and
a setting of – will decrease it. With a value of 0 there will be no change.
Pitch EG change (level) (AMS=JS-Y/Velocity, Intensity= positive (+) value
Note-on
Note-off
Note-on
Note-off
Note-on
Note-off
A note played softly with
Start Level Swing set at 0,
Attack Level Swing set to +,
the Joystick pulled on
A note played strongly with
Start Level Swing set to 0,
Attack Level Swing set to +,
the Joystick pulled on
A note played strongly with
Start Level Swing set to 0,
Attack Level Swing set to –,
the Joystick pulled on
▪ Modulating the Pitch EG times
Use the Time Modulation > AMS parameter to select a modulation source for the
Pitch EG > Time parameters.
> Use the Time Modulation > Intensity parameters (-99…+99) to specify the
depth and direction of the effect that AMS will have on the Time parameters. With
a value of 0, the pitch EG times will be just as specied by the Time settings.
The alternate modulation value at the moment that the EG reaches each point will
determine the actual value of the EG time that comes next.
For example, the decay time will be determined by the alternate modulation value
at the moment that the attack level is reached.
When this parameter is set to values of 16, 33, 49, 66, 82, or 99, the specied EG
times will speed up as much as 2, 4, 8, 16, 32, or 64 times respectively (or slowed
down to 1/2, 1/4, 1/8, 1/16, 1/32, or 1/64 of the original time).
For example, with the Velocity AMS, increasing the absolute value of Intensity will
allow strongly-played notes to increase the changes in pitch EG Time values. The
direction of the change is specied by At (Attack Time Swing) and Dc (Decay Time
Swing). As you play more softly, the pitch EG times will more closely approach the
actual settings of the pitch EG.
> Use the At (Attack Time Swing) and the Dc (Decay Time Swing) parameters
to specify the direction in which AMS will affect the Time > Attack and Decay pa-
rameter. With positive (+) values of Intensity, a setting of + will cause the time to
Loading ...
Loading ...
Loading ...