Loading ...
Loading ...
Loading ...
886| Editing the Sounds
> Use the second Trigger Mode > Mode pop-up menu to choose an addition-
al condition before triggering the selected oscillator. For example, a Normal-
triggered oscillator will always play, while a Legato-triggered oscillator will only
play when a note is played legato.
Trigger Mode (How) Meaning
Normal The oscillator always plays when a key, or another triggering control
chosen in the rst menu, is pressed.
Legato The oscillator only plays when the note is played ‘legato’. The delay and
pitch interval from the previous note are also to be considered, as set
in the Sound Edit > Basic > Sound page (Legato as OSC Trigger pa-
rameter).
Legato Up Like Legato, but this is only activated when the second note is out of the
Max Range value (as set in the Sound Edit > Basic > Sound page) and it
is higher than the rst one.
Legato Down Like Legato, but this is only activated when the second note is out of the
“Max Range” value (as set in the Sound Edit > Basic > Sound page) and
it is lower than the rst one.
Not Legato The oscillator only plays when the note is NOT played legato (it is the
opposite of the above choice). This only works if at least an oscillator is
set to Legato; if there isn’t, this behaves as a Normal trigger.
Sound Controller 1 The oscillator only plays when a CC#80 (Sound Controller 1) message
is received. Press and release the corresponding physical controller,
and the next note will also trigger the selected oscillator. If you keep
it pressed, the oscillator will continue to be triggered until you release
the controller.
Note: In Sound Edit mode, the Assignable Switch 1 is automatically as-
signed to Sound Controller 1.
Hint: This (like the following Sound Controllers) is especially useful to
enable a different nuance to the following note(s).
Sound Controller 2 As the above, but with the CC#81 (Sound Controller 2) message.
Note: In Sound Edit mode, the Assignable Switch 2 is automatically as-
signed to Sound Controller 2.
Sound Controller 3 As the above, but with the CC#82 (Sound Controller 3) message.
Note: In Sound Edit mode, the Assignable Switch 3 is automatically as-
signed to Sound Controller 3.
Sound Controller Y+ As the above, but with the joystick, assigned as the Sound Controller,
pushed at least half-way forward (value 64). The controller is turned
off when the joystick is released. This control is equivalent to a CC#01
(Modulation) Control Change message.
Sound Controller Y- As the above, but with the joystick, assigned as the Sound Controller,
pulled at least half-way back (value 64). The controller is turned off
when the joystick is released. This control is equivalent to a CC#02
(Breath Controller) Control Change message.
Loading ...
Loading ...
Loading ...