Loading ...
Loading ...
Loading ...
Effect parameters |1173
Stereo Isolator
This is a stereo effect that separates the input signal into low, mid, and high-fre-
quency bands, and controls the volume of each band independently. For example
you can separately boost or cut the kick, snare, and hi-hat sounds from a drum
signal in realtime.
D
-mod
D
-mod
D
-mod
Left
Right
FX Amt
FX Amt
Stereo In - Stereo Out
Trim
Isolator
Low
Mid
High
Trim
Low
Mid
High
a Trim 0…100 Sets the input level
b Low/Mid [Hz] 100…500 Sets the frequency at which the low and mid
bands are divided
c Mid/High [Hz] 2000…6000 Sets the frequency at which the mid and high
bands are divided
d Low Gain [dB] –Inf,
–59…+12
Sets the low-frequency gain
Src Off…Tempo Selects the source that will modulate low-fre-
quency gain
Amt –72…+72 Sets the amount by which the low-frequency gain
will be modulated
e Mid Gain [dB] –Inf, –59…+12 Sets the mid-frequency gain
Src Off…Tempo Selects the modulation source for mid-frequency
gain
Amt –72…+72 Sets the amount by which the mid-frequency gain
will be modulated
Loading ...
Loading ...
Loading ...