Loading ...
Loading ...
Loading ...
Effect parameters |1211
Pitch Shift Mod
This effect modulates the detuned pitch shift amount using an LFO, adding a clear
spread and width to the sound by panning the effect sound and dry sound to the
left and right. This is especially effective when the effect sound and dry sound
output from stereo speakers are mixed.
Left
Right
FX Amt
FX Amt
FX Amt = 100: Mono In - Stereo Out / FX Amt = 0: Stereo In - Stereo Out
LFO: Tri / Sqr
Pan
+
Pitch Shifter
a Pitch Shift [cents] –100…+100 Sets the pitch difference from the input signal
b LFO Waveform Triangle, Square Selects the LFO Waveform
c LFO Frequency
[Hz]
0.02…20.00 Sets the speed of the LFO
Src Off…Tempo Selects a modulation source for LFO speed
Amt –20.00…
+20.00
Sets the modulation amount of LFO speed
d MIDI Sync Off, On When this is on, the LFO speed is set by BPM, Base
Note, and Times, instead of Frequency
BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–300 sets the
tempo manually for this individual effect
Base Note
…
Selects the type of notes that specify the LFO speed
Times x1…x32 Sets the number of notes that specify the LFO speed
e Depth –100…+100 Sets the LFO modulation depth for pitch shift amount
Src O ff…Temp o Selects the modulation source of the depth of modu-
lation
Amt –100…+100 Sets the modulation amount of the depth of modula-
tion
f Pan L, 1 : 99…99 :
1, R
Sets the panning effect sound and dry sound sepa-
rately
Loading ...
Loading ...
Loading ...