Loading ...
Loading ...
Loading ...
305
Programmable Stitch Creator
Editing a Pattern in Fill/Stamp Mode
Editing a Pattern in Fill/Stamp Mode
■ Selecting patterns
1 Click the [Home] tab.
2 Click [Select] in the [Tools] group to use the
[Select] tool.
3 Click the pattern.
1 Rotation handle
2 Handles
4 To select an additional pattern, hold down the
<Ctrl> key and click the other pattern.
■ Moving patterns
Selected patterns can be dragged to move them.
■ Scaling patterns
Drag a handle of the selected pattern to adjust its
size. Drag the rotation handle to rotate the pattern.
■ Reshaping a fill/stamp stitch
patterns
1 Click [Select Point] in the [Tools] group.
2 Click the broken line.
b
• You can also select patterns by dragging the
pointer across the pattern.
• Hold down the <Ctrl> key and click a selected
pattern to deselect it.
b
• To move the pattern horizontally or vertically,
hold down the <Shift> key while dragging it.
• Pressing the arrow keys moves the selected
pattern one grid mark in the direction of the
arrow on the key.
1
2
b
• If the <Shift> key is held down while a handle is
dragged, the pattern is enlarged or reduced from
the center of the pattern.
•Click [Flip Vertically] in the [Flip] group to flip
the selected pattern(s) up/down. Click [Flip
Horizontally] in the [Flip] group to flip the
selected pattern(s) left/right.
• Using commands other than those mentioned
above, selected patterns can be edited in other
ways, for example, duplicated or deleted.
cc "Programmable Stitch Creator" on page 297.
Loading ...
Loading ...
Loading ...