Loading ...
Loading ...
Loading ...
264
Design Center
Figure Handle Stage
Figure Handle Stage
1 In the Line Image Stage, click [To Figure
Handle].
cc "Line Image Stage" on page 251.
2 Specify the desired settings in the [Figure
Object Conversion Setting] dialog box, and
then click [OK].
a Select a setting under [Resolution].
Fine
Select this setting only if the image
contains many small details.
Normal
Select this setting to provide a sufficient
resolution without making the file too
large.
Coarse
Select this setting to keep the file as small
as possible.
b To replace the black outlines with figure
handle lines along the center of the
outlines, select the [Thinning Process]
check box, and then use the slider to
select the degree of detail.
1 ON
To replace the black lines with figure handle
lines following the border of the outlines, clear
the [Thinning Process] check box.
2 OFF
c Use the [SIZE] slider to set the size.
d You will not be able to enlarge the image
beyond the limits of the Design Page
area. If necessary, click [Design Page
Property], and then change the Design
Page size.
e To create outline data from a part of the
image, select the specific area by clicking
[Pick Area], then dragging the pointer (+)
to draw a selection frame around the area
to be selected.
Changing settings for
converting to outlines
b
When the slider is set to [Much], even very thick
black lines will be replaced with a line along the
center.
a
b
c
e
d
1
2
Loading ...
Loading ...
Loading ...