Loading ...
Loading ...
Loading ...
209
Operations for Specific Applications
Tutorial 10-3: Embroidering With the Jumbo Frame
Tutorial 10-3: Embroidering With the
Jumbo Frame
This section describes the procedures for creating embroidery data and for embroidering using the jumbo
frame (frame size: 360 × 360 mm; with mounts on both sides of the embroidery frame).
Jumbo frame: 360 × 360 mm embroidery frame
The sample file for this tutorial is located at Documents (My documents)\PE-DESIGN 11\Tutorial\Tutorial_10.
1 Click , then [Design Settings].
a
• If the jumbo frame was selected, the size of the Design Page becomes 350 × 350 mm in order to create
margins that allow automatic positioning using the built-in camera.
• The jumbo frame described here was designed specifically for our multi-needle embroidery machines
equipped with a built-in camera. It cannot be used with any other machine, such as single-needle
embroidery machines. Check the instruction manual provided with your multi-needle embroidery machine
to determine if it is compatible with the jumbo frame.
b
For details on embroidering using the camera and on affixing the embroidery positioning stickers, refer to the
instruction manual provided with the embroidery machine.
Step 1 Selecting the Design Page size
Step 2 Creating the embroidery design
Step 3 Checking a divided pattern
Step 4 Attaching stabilizer to the fabric
Step 5 Embroidering
Step 1 Selecting the Design Page
size
Loading ...
Loading ...
Loading ...