Loading ...
Loading ...
Loading ...
108
Saving and Printing
Basic Layout & Editing Operations
3 Select a format (.dst, .hus, .exp, .pcs, .vip,
.sew, .jef, .csd, .xxx, and .shv) that the file will
be exported as.
■ Specifying print settings
Before printing, you may need to change the print
settings for the embroidery design files.
1 Click , then [Print], then [Print Setup].
a Specify the paper size.
b Specify the paper orientation.
c To print the embroidery pattern, select
[Embroidery print mode].
d Print type
Actual Size:
Select this option to print the design at
actual size and the sewing information
(dimensions of the embroidery pattern,
sewing color order, stitch count and
hoop position) on separate pages.
Reduced Size:
Select this option to print a reduced
image together with all of the above-
mentioned information on a single
page.
e Print option
Print image:
Select this check box to print the image
imported into the Design Page in
addition to the embroidery pattern.
However, any part of the image
extending out of the print area for the
embroidery will not be printed.
Print sewing area box & center axes:
(This setting is only available when
[Actual Size] is selected.)
(This setting cannot be selected if
[Jumbo Frame] has been selected as
the Design Page size.)
Print template grid:
Select this check box to print green
lines to represent the grid printed on
the embroidery sheet included with the
hoop. (This setting cannot be selected
if User Hoop, [Cap Frame], [Cylinder
Frame], [Jumbo Frame], [Clamp
Frame] or [Round Frame] has been
selected as the Design Page size.)
b
The [Number of jumps for trim] setting can be
specified for outputting to the .dst format. Before
outputting, click the [Option] button, then
[Options], then [DST Settings] to specify the
settings.
cc "Specifying the number of jumps in
embroidery design of the DST format" on
page 369
a
• Some patterns imported from original cards
cannot be exported.
• Divided embroidery patterns and embroidery
patterns for the jumbo frame or multi-position
hoop will be exported as a single file, and will not
be split into sections.
Printing
a
c
d
f
b
e
i
g
h
j
: Select this option to print black
lines to indicate the sewing area
(refer to "Specifying the sewing
area" on page 18) and the
center axes for the data.
: Select this option to print an
embroidery positioning mark in
the center of the axes.
Loading ...
Loading ...
Loading ...