Loading ...
Loading ...
Loading ...
223
Transferring Data
Transferring Embroidery Designs to Machines
Designs can be transferred to embroidery machines
that can be connected to a computer using a USB
cable.
1 Connect the embroidery machine to the
computer.
2 Click the [Home] tab.
3 Click [Send] in the [Sew] group, click [Send
to Your Machine], and then select the
desired drive.
Data transfer begins.
4 After the data has been transferred, the
message "Finished outputting data." appears,
indicating that the transfer is finished. Click
[OK].
Transferring directly to a
machine's memory
a
If there is already a file with the same name at the
destination, the following dialog box appears.
Select whether to overwrite the existing file, to stop
copying or to copy the file using a different name.
b
• For details on transferring designs with this
method, refer to the instruction manual provided
with your embroidery machine.
• If multiple machines are connected, specify
where the data is to be transferred in the area
shown below.
• If the connected embroidery machine has been
set to Link mode, the command [Send to Your
Machine], mentioned in this procedure, cannot
be selected. To select this command, return the
machine to normal mode.
Loading ...
Loading ...
Loading ...