Loading ...
Loading ...
Loading ...
225
Transferring Data
Transferring Embroidery Designs to Machines
■ Transferring embroidery patterns
to a sewing machine
1 Click the [Home] tab.
2 Click [Send] in the [Sew] group, click [Send
to Network Machine], and then select the
desired machine.
Data transfer begins.
3 After the data has been transferred, the
message “Finished outputting data.” appears,
indicating that the transfer is finished. Click
[OK].
Designs can be transferred to an embroidery
machine equipped with a card slot.
cc For details on writing multiple embroidery
designs, refer to "Transferring
Embroidery Designs to Machines" on
page 284.
1 Plug the USB card writer module. Insert an
original card into the USB card writer module.
2 Click the [Home] tab.
Transferring to a machine
by using an original card
a
• Be sure that the hoop size of the design does not
exceed the hoop that will be used on the
embroidering machine.
• When writing to an original card that already
contains data, all data on the card will be
deleted. Before writing to a card, save all
necessary data to a hard disk or other media,
and check that no necessary data remains on
the card.
cc "From an original card" on page 103
• An embroidery design for the jumbo frame
cannot be transferred to the machine by using
an original card. This size is designed
specifically for our multi-needle embroidery
machines equipped with a built-in camera.
cc "Tutorial 10-3: Embroidering With the Jumbo
Frame" on page 209
Loading ...
Loading ...
Loading ...