Loading ...
Loading ...
Loading ...
231
Transferring Data
Using the Link Function to Embroider From the Computer
■ Changing the embroidery
machine name appearing with the
USB Link function
1 Click [Machine Name] in the [Option] menu
of the queue whose name is to be changed.
2 Type the name in the [Machine Name] box,
and then click [OK].
b
• The embroidering order of designs in the queue
can be changed.
cc For details, refer to "If multiple designs were
sent to a single machine" on page 229.
• If additional machines are connected while the
[USB Link] dialog box is displayed,
corresponding queues will appear. If a machine
is disconnected, the corresponding queue will
disappear.
• To display the [Property] dialog box for a file,
double-click the file's icon, or click a file to select
it, right-click it, and then click [Property] from
the menu that appears.
• To reduce this dialog box to a button on the
taskbar, click the [Minimize] button.
To disconnect the USB cable, or shut down the
computer
• After data transferring to embroidery machine
and the transferring message on the screen of
the machine is closed, you can disconnect the
USB cable, or shut down the computer.
When connected to the embroidery machine
again, you can continue the USB Link operation.
• The embroidery machine can finish sewing the
design currently being embroidered even if the
computer is turned off.
• If the embroidery machine is turned off while it is
embroidering, the resume operation can be
used the next time it is turned on. At that time,
transmission can be resumed using the USB
Link function by clicking [USB Link] in [Design
Database] or in the [Option] menu of [Layout
& Editing] to display the [USB Link] dialog box.
• If the embroidery machine connection cannot be
detected, the [USB Link] dialog box will close
automatically.
• To display the [USB Link] dialog box again after
the computer has been restarted, click [USB
Link] in [Design Database] or in the [Option]
menu (in the upper-right corner) of [Layout &
Editing].
• To display the [Distributor] dialog box, click
[Distributor] in the [Option] menu of the [USB
Link] dialog box.
b
A name (up to 10 alphanumeric characters/
symbols) can be specified for the embroidery
machine.
a
• When an embroidery machine is connected to
the computer, the embroidery machine is
recognized by the computer as a removable disk
and is assigned a drive letter. If this drive letter
is the same as one that has already been
assigned by the computer, designs cannot be
sent from the computer to that embroidery
machine. This problem occurs, for example, if a
network drive has been assigned a computer
drive letter. If this occurs, cancel the assignment
for the drive with the conflicting drive letter.
• When the number of embroidery machines
connected to the computer via USB is
increased, the operating system may require
that the computer be restarted. At that time,
restart the computer.
Loading ...
Loading ...
Loading ...