Loading ...
Loading ...
Loading ...
222
Transferring Data
Transferring Embroidery Designs to Machines
Transferring Embroidery Designs to
Machines
The procedures for transferring the created embroidery pattern to an embroidery machine differ depending on
your embroidery machine model. For details, refer to the instruction manual provided with your embroidery
machine.
Designs can be transferred to an embroidery
machine compatible with the USB Host function.
1 Plug the USB media into the computer.
2 Click the [Home] tab.
3 Click [Send] in the [Sew] group, click [Send
to USB Media], and then select the desired
drive.
Data transfer begins.
4 After the data has been transferred, the
message "Finished outputting data." appears,
indicating that the transfer is finished. Click
[OK], and then remove the USB media.
Transferring to a machine
by using USB media
a
The "PE-DESIGN Software Key" cannot be used
as USB media. Do not save embroidery files on
the "PE-DESIGN Software Key" for transferring.
a
If there is already a file with the same name at the
destination, the following dialog box appears.
Select whether to overwrite the existing file, to stop
copying or to copy the file using a different name.
b
If multiple USB media are connected, specify
where the data is to be transferred in the area
shown below.
Loading ...
Loading ...
Loading ...