Loading ...
Loading ...
Loading ...
Instrument setup
R&S
®
MXO 4 Series
94User Manual 1335.5337.02 ─ 05
Prefix
If enabled, inserts the default prefix in the file name. The prefix indicates the type of
data that is saved, for example, RefCurve, Settings.
Remote command:
MMEMory:AUTonaming:PREFix on page 422
Date/time
If enabled, the current date and time are inserted in the filename pattern.
Remote command:
MMEMory:AUTonaming:TIME on page 422
Index
If enabled, inserts an index.
Remote command:
MMEMory:AUTonaming:INDex on page 422
Enable autosave
Enables the automatic saving of the waveform. With "Autosave interval", you can
define the time interval for the automatic saving.
Remote command:
MMEMory:AUSave:ENABle on page 422
MMEMory:AUSave:INTerval on page 423
Default path for all file operations
Defines the path that is displayed in the file selection dialog box for loading and storing
operations. On the instrument, all user data is written to /home/storage/userData.
You can create subfolders in this folder. The path to a USB storage device
is /run/media/usb/.
To switch the directory quickly, double-tap the path button. Use the symbols on the left
of the file explorer box to change the directory.
Remote command:
MMEMory:AUTonaming:DEFaultpath on page 423
Reset path
Resets the default file path to the factory default.
Remote command:
MMEMory:AUTonaming:RESPath on page 423
MMEMory:AUTonaming:RESall on page 423
5.8.1.2 Defining default file paths and names
When a save or load operation is performed, a default file name and path is provided.
You can configure which path is used and how the file name is generated. In the file
selection dialog box, you can change the folder and name as desired.
Save / recall
Loading ...
Loading ...
Loading ...