Loading ...
Loading ...
Loading ...
Acquisition and waveform setup
R&S
®
MXO 4 Series
112User Manual 1335.5337.02 ─ 05
Show channel
Switches the selected channel signal on or off.
The signal icon opens on the signal bar. The waveform of the last acquisition is dis-
played in the diagram.
Remote command:
CHANnel<ch>:STATe on page 430
Vertical scale
Sets the vertical scale in Volts per division. The vertical scale defines the displayed
amplitude of the selected waveform.
The current value is shown in the signal icon. Vertical scale directly affects the resolu-
tion of the waveform amplitude. To get the best resolution of the ADC, set the wave-
forms to cover most of the height of the diagram.
Remote command:
CHANnel<ch>:SCALe on page 430
Vertical setup
Loading ...
Loading ...
Loading ...