Loading ...
Loading ...
Loading ...
Trigger
R&S
®
MXO 4 Series
156User Manual 1335.5337.02 ─ 05
1. Select the "Clock Source" and the "Slope".
2. Tap "Set state".
See Chapter 7.4.12.2, "Set state for state and pattern trigger of analog channels",
on page 158 for setting details.
Slope
Sets the edge direction for the trigger.
"Positive"
Selects the rising edge, which is a positive voltage change.
"Negative"
Selects the falling edge, which is a negative voltage change.
"Either"
Selects the rising and falling edge. After starting an acquisition, the
instrument triggers on the first identified edge.
Remote command:
TRIGger:EVENt<ev>:STATe:SLOPe on page 479
7.4.12 Pattern trigger
Access: "Menu" > "Trigger" > "Setup" tab > "Type = Pattern"
The pattern trigger works like a logic trigger. It provides logical combinations of the
input channels and can be used for verifying the operation of digital logic. If the chan-
nel states match the desired pattern, the pattern trigger occurs.
Trigger types
Loading ...
Loading ...
Loading ...