Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
616User Manual 1335.5337.02 ─ 05
SBUS<sb>:I2C:FILTer:IMIN.............................................................................................618
SBUS<sb>:I2C:FILTer:FRAMe<fr>:FLD<fl>:IMIN...............................................................618
SBUS<sb>:I2C:FILTer:IOPerator......................................................................................618
SBUS<sb>:I2C:FILTer:FRAMe<fr>:FLD<fl>:IOPerator....................................................... 618
SBUS<sb>:I2C:FILTer:BIT...............................................................................................619
SBUS<sb>:I2C:FILTer:FRAMe<fr>:FLD<fl>:BIT................................................................ 619
SBUS<sb>:I2C:FILTer:FIENable...................................................................................... 619
SBUS<sb>:I2C:FILTer:FRAMe<fr>:FLD<fl>:ENABle.......................................................... 619
SBUS<sb>:I2C:FILTer:ENABle <Enable>
Enables the filtering on I2C frames. Only the frames that match the selected filter con-
ditions are displayed.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<Enable> ON | OFF
*RST: OFF
Usage: Asynchronous command
Manual operation: See "Enable" on page 299
SBUS<sb>:I2C:FILTer:FRENable <Frame>,<Enabler>
SBUS<sb>:I2C:FILTer:FRAMe<fr>:ENABle <Enable>
Enables or disables the specific frame to be filtered on.
Suffix:
<sb>
.
1...4, index of the serial bus
<fr> index of the frame
Parameters:
<Enable> ON | OFF
*RST: ON
Usage: Asynchronous command
Manual operation: See "Frame type" on page 299
SBUS<sb>:I2C:FILTer:DMAX <Frame>,<Field>,<Data>
SBUS<sb>:I2C:FILTer:FRAMe<fr>:FLD<fl>:DMAX <Data_Max>
Sets the end value of a data pattern range if the operator is set to INRange or
OORANGe.
Suffix:
<sb>
.
1...4, index of the serial bus
<fr> index of the frame
<fl> index of the field
Protocols
Loading ...
Loading ...
Loading ...