Loading ...
Loading ...
Loading ...
Spectrum analysis
R&S
®
MXO 4 Series
236User Manual 1335.5337.02 ─ 05
Remote command:
CALCulate:SPECtrum<sp>:GATE:STOP on page 567
Position
Sets the position of the displayed frequency range.
The width of the gate is defined using the "Width" setting.
Remote command:
CALCulate:SPECtrum<sp>:GATE:POSition on page 566
Width
Defines the width of the displayed gate.
The position of the span is defined using the "Position" setting.
Remote command:
CALCulate:SPECtrum<sp>:GATE:WIDTh on page 567
10.6 Spectrum peak list
A peak list measurement detects all peaks above a user-definable threshold and
optionally indicates the peaks in the spectrum diagram.
Access: "Menu" > "Spectrum" > "PeakList".
In the peak list dialog, you can define various criteria for a peak search. The peaks can
be indicated in the frequency diagram by peak boxes, and the measured peak frequen-
cies and magnitudes are listed in the peak list table.
The number of determined peaks can be defined. You can sort the results by frequency
or power value, and the peak labels are adjusted accordingly.
Spectrum peak list
Loading ...
Loading ...
Loading ...