Loading ...
Loading ...
Loading ...
Protocol analysis
R&S
®
MXO 4 Series
287User Manual 1335.5337.02 ─ 05
Frame condition
Defines the start of a frame. A frame contains a number of successive words, at least
one word.
"CS"
Start and end of the frame is defined by the active state of the slave
select signal.
"CLK timeout"
Defines a timeout on the clock line SCLK as limiter between two
frames. The timeout condition is used for SPI connections without a
CS line. Enter the minimum clock idle time in the field.
Remote command:
SBUS<sb>:SPI:FRCondition on page 593
Timeout
Sets the minimum clock idle time if a timeout on the clock line SCLK is used as limiter
between two frames.
See also: "Frame condition" on page 287.
Remote command:
SBUS<sb>:SPI:TIMeout on page 597
13.2.2.3 Display settings
For details about the display settings, see Chapter 13.1.3, "Display", on page 278.
13.2.2.4 Shortcuts
For details about the available shortcuts, see Chapter 13.1.6, "Shortcuts",
on page 280.
13.2.3 SPI filter
Access:[Apps] key > "Protocol" tab > "SPI" > "Filter" tab
SPI bus (option R&S
MXO4-K510)
Loading ...
Loading ...
Loading ...