Loading ...
Loading ...
Loading ...
Operating the instrument
R&S
®
MXO 4 Series
55User Manual 1335.5337.02 ─ 05
5. If a diagram is empty, you see a trash can icon in the diagram center. Use the icon
to delete the diagram, or drag waveform icons into the diagram.
Remote commands: see Chapter 17.7.2, "SmartGrid", on page 410
4.6 Toolbar
The toolbar provides direct access to important control and measurement functions.
By default, the toolbar shows the most frequently used functions. You can configure the
content of the toolbar, see Chapter 4.6.2, "Configuring the toolbar", on page 55.
4.6.1 Using the toolbar
Using the toolbar is easy and straightforward.
Some of the toolbar functions are one-click actions. These actions are performed
immediately when you tap the icon.
Other toolbar functions are analyzing functions. These actions are interactive actions.
To use analyzing functions (interactive actions)
1. Tap the icon of the function in the toolbar.
2. Check and adjust the settings in the overlay menu.
3. Select the source waveform if it is needed. For zoom, drag a rectangle, or tap the
diagram to define the zoom area.
4.
If the overlay menu does not close automatically, tap the
icon.
4.6.2 Configuring the toolbar
You can configure the content of the toolbar so that only the required functions are dis-
played. Furthermore, date and time can be hidden. The toolbar configuration is part of
the user preferences. It is retained when you switch off and on the instrument, and you
can save it in the user preferences and user-defined preset.
1. To open the toolbar configuration, tap the icon in the toolbar:
2. Select the required toolbar functions:
a) In the "Show/Hide tools" section, disable all functions that you do not need.
Toolbar
Loading ...
Loading ...
Loading ...