Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
444User Manual 1335.5337.02 ─ 05
PROBe<ch>:SETup:OFFSet:TOMean
Compensates automatically for a DC component of the input signal using the result of
a background mean measurement.
Suffix:
<ch>
.
1 to 4, index of the analog channel
Usage: Event
Asynchronous command
Manual operation: See "Set offset to mean" on page 119
PROBe<ch>:SETup:OFFSet:AZERo
Measures the zero error. Short the signal pin and the ground pin together and connect
them to the ground of the DUT before sending the command.
Suffix:
<ch>
.
1 to 4, index of the analog channel
Usage: Event
Asynchronous command
Manual operation: See "AutoZero, Use AutoZero" on page 120
PROBe<ch>:SETup:OFFSet:USEautozero <UseAutoZeroOffset>
Includes the AutoZero offset in measurement results. The auto zero error is detected
with PROBe<ch>:SETup:OFFSet:AZERo.
Suffix:
<ch>
.
1 to 4, index of the analog channel
Parameters:
<UseAutoZeroOffset> ON | OFF
*RST: OFF
Example:
PROB2:SET:OFFS:AZER
PROB2:SET:OFFS:USE ON
Detects the zero error and uses it for correction of measurement
results.
Usage: Asynchronous command
Manual operation: See "AutoZero, Use AutoZero" on page 120
PROBe<ch>:SETup:NAME?
Queries the name of the probe.
Suffix:
<ch>
.
1 to 4, index of the analog channel
Acquisition and setup
Loading ...
Loading ...
Loading ...