Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
430User Manual 1335.5337.02 ─ 05
CHANnel<ch>:POSition..................................................................................................431
CHANnel<ch>:COUPling................................................................................................ 431
CHANnel<ch>:INVert......................................................................................................432
CHANnel<ch>:SKEW:TIME.............................................................................................432
CHANnel<ch>:BANDwidth.............................................................................................. 433
CHANnel<ch>:EATScale................................................................................................ 433
CHANnel<ch>:EATTenuation...........................................................................................433
CHANnel<ch>:IMPedance.............................................................................................. 434
CHANnel<ch>:STATe <State>
Switches the selected channel signal on or off.
Suffix:
<ch>
.
1 to 4, index of the analog channel
Parameters:
<State> ON | OFF
*RST: OFF
Usage: Asynchronous command
Manual operation: See "[C<n>]" on page 38
CHANnel<ch>:SCALe <Scale>
Sets the vertical scale in Volts per division. The vertical scale defines the displayed
amplitude of the selected waveform.
Suffix:
<ch>
.
1 to 4, index of the analog channel
Parameters:
<Scale> Range: 0.001 to 1
Increment: 0.001
*RST: 0.05
Default unit: V/div
Usage: Asynchronous command
Manual operation: See "[Scale]" on page 39
CHANnel<ch>:RANGe <Range>
Sets the voltage range across the 10 vertical divisions of the diagram. The command is
an alternative to CHANnel<ch>:SCALe.
Suffix:
<ch>
.
1 to 4, index of the analog channel
Acquisition and setup
Loading ...
Loading ...
Loading ...