Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
574User Manual 1335.5337.02 ─ 05
FRANalysis:ENABle <State>
Enables the frequency response analysis application.
You can start the analysis with FRANalysis:STATe.
Parameters:
<State> ON | OFF
Usage: Asynchronous command
FRANalysis:AUToscale
<AutoScale>
Enables the auto scaling function for each measurement.
Parameters:
<AutoScale> ON | OFF
*RST: ON
Usage: Asynchronous command
Manual operation: See "Auto scale" on page 249
FRANalysis:AMPLitude:MODE <AmplitudeMode>
Selects, if the amplitude is a constant value (FRANalysis:GENerator:AMPLitude)
or is defined as an amplitude profile.
Parameters:
<AmplitudeMode> CONStant | PROFile
*RST: CONStant
Usage: Asynchronous command
Manual operation: See "Amplitude profile" on page 245
FRANalysis:FREQuency:STARt <StartFrequency>
Sets the start frequency of the sweep.
Parameters:
<StartFrequency> Range: 0.01 to 100000000
Increment: 1
*RST: 100
Default unit: Hz
Usage: Asynchronous command
Manual operation: See "Start, Stop" on page 244
FRANalysis:FREQuency:STOP <StopFrequency>
Sets the stop frequency of the sweep.
Applications
Loading ...
Loading ...
Loading ...