Loading ...
Loading ...
Loading ...
Protocol analysis
R&S
®
MXO 4 Series
345User Manual 1335.5337.02 ─ 05
"Index"
The index setup consists of a comparison condition and one or two
index values.
Remote command:
SBUS<sb>:LIN:FILTer:IMAX on page 681
SBUS<sb>:LIN:FILTer:FRAMe<fr>:FLD<fl>:IMAX
on page 681
SBUS<sb>:LIN:FILTer:IMIN on page 682
SBUS<sb>:LIN:FILTer:FRAMe<fr>:FLD<fl>:IMIN
on page 682
SBUS<sb>:LIN:FILTer:IOPerator on page 682
SBUS<sb>:LIN:FILTer:FRAMe<fr>:FLD<fl>:IOPerator
on page 682
Error type
Enables filtering on the selected error type.
The available errors are "Checksum error", "Parity error","Start error", "Sync error" and
"Length error".
Remote command:
SBUS<sb>:LIN:FILTer:ERENable on page 680
SBUS<sb>:LIN:FILTer:ERRor<n>:ENABle on page 680
13.6.4 LIN decode results
When the configuration of the serial bus is complete, the signal can be decoded:
1. Open the "Serial Bus" dialog for the respective bus.
2. In the "Setup" tab, enable "State".
3. In the "Display" tab, enable "Show decode table".
For a description of the display settings, see also Chapter 13.1.3, "Display",
on page 278.
The instrument captures and decodes the signal according to the standard definition
and the configuration settings.
The color-coding of the various protocol sections and errors simplifies the interpretation
of the visual display. The decode information condenses or expands, depending on the
horizontal scale. Various data formats are available to show the result values.
LIN (option R&S MXO4-K520)
Loading ...
Loading ...
Loading ...