Loading ...
Loading ...
Loading ...
Protocol analysis
R&S
®
MXO 4 Series
320User Manual 1335.5337.02 ─ 05
XL sample point
Sets the position of the sample point within the bit in percent of the nominal bit time for
the CAN XL frame.
Remote command:
SBUS<sb>:CAN:XDATa:SAMPlepoint on page 646
Threshold
Press "Set thresholds", to open the "Threshold setup" dialog.
Enter the value directly in the field of the threshold setup dialog.
Additional to the threshold, you can also set a hysteresis.
Remote command:
SBUS<sb>:CAN:DATA:THReshold on page 644
SBUS<sb>:CAN:FAST:HYSTeresis on page 645
SBUS<sb>:CAN:FAST:THReshold on page 645
SBUS<sb>:CAN:SIC:HYSTeresis on page 644
SBUS<sb>:CAN:SIC:THReshold on page 645
Show threshold lines
If enabled, the threshold lines are displayed in the diagram.
The lable of the threshold line is set according to the signal it is reffering to.
Remote command:
SBUS<m>:THReshold on page 590
13.5.1.2 Display settings
For details about the display settings, see Chapter 13.1.3, "Display", on page 278.
CAN (option R&S
MXO4-K520)
Loading ...
Loading ...
Loading ...