Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
654User Manual 1335.5337.02 ─ 05
EQUal | NEQual | LTHan | LETHan | GTHan | GETHan
Equal, Not equal, Less than, Less or equal than, Greater Than,
Greater or equal than. These conditions require one pattern to
be set with TRIGger:CAN:XDATa:AF:MIN.
INRange | OORange
In range / Out of range: Set the minimum and maximum value of
the range with TRIGger:CAN:XDATa:AF:MIN and TRIGger:
CAN:XDATa:AF:MAX.
*RST: EQUal
Usage: Asynchronous command
Manual operation: See "AF" on page 333
TRIGger:CAN:XDATa:AF:MAX
<AfPatternTo>
Sets the end value of an acceptance field if TRIGger:CAN:XDATa:AF:CONDition is
set to INRange or OORange.
Parameters:
<AfPatternTo> List of comma separated values
Usage: Asynchronous command
Manual operation: See "AF" on page 333
TRIGger:CAN:XDATa:AF:MIN <AfPattern>
Specifies an acceptance field pattern, or sets the start value of a range.
Parameters:
<AfPattern> List of comma separated values
Usage: Asynchronous command
Manual operation: See "AF" on page 333
TRIGger:CAN:XDATa:SDT:CONDition <SdtOperator>
Sets the comparison condition for the service data unit type to a specific value or a
range.
Parameters:
<SdtOperator> EQUal | NEQual | LTHan | LETHan | GTHan | GETHan |
INRange | OORange
EQUal | NEQual | LTHan | LETHan | GTHan | GETHan
Equal, Not equal, Less than, Less or equal than, Greater Than,
Greater or equal than. These conditions require one pattern to
be set with TRIGger:CAN:XDATa:SDT:MIN.
Protocols
Loading ...
Loading ...
Loading ...