Loading ...
Loading ...
Loading ...
Protocol analysis
R&S
®
MXO 4 Series
303User Manual 1335.5337.02 ─ 05
Address and data ← Type
Sets the trigger to a combination of address and data condition.
No Ack conditions
Selects which missing acknowledge bits is detected if the trigger type is set to "No
Ack".
"Address Nack"
No secondary recognizes the address.
"Data write Nack"
The addressed secondary does not accept the data.
"Data read Nack"
Marks the end of the read process when the primary reads data from
the secondary. This Nack is sent according to the protocol definition,
it is not an error.
Remote command:
TRIGger:I2C:ADNack on page 613
TRIGger:I2C:DWNack on page 615
TRIGger:I2C:DRNack on page 615
Address type
Sets the address length to be triggered on: 7 bit or 10 bit.
Remote command:
TRIGger:I2C:AMODe on page 614
R/W bit
Toggles the trigger condition between read and write access of the primary. Select
"Either" if the transfer direction is not relevant for the trigger condition.
I²C (option R&S
MXO4-K510)
Loading ...
Loading ...
Loading ...