Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
675User Manual 1335.5337.02 ─ 05
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<Standard> V1X | V2X | J2602 | AUTO
*RST: AUTO
Usage: Asynchronous command
Manual operation: See "LIN standard" on page 338
17.16.6.2
Trigger
Trigger commands for serial buses affect the current trigger source. Therefore, set the
trigger source to the required serial bus with TRIGger:EVENt<ev>:SOURce before
sending the bus-specific trigger commands.
TRIGger:LIN:TYPE.........................................................................................................675
TRIGger:LIN:CHKSerror................................................................................................. 676
TRIGger:LIN:DCONdition................................................................................................676
TRIGger:LIN:DMIN.........................................................................................................676
TRIGger:LIN:DPOSition..................................................................................................676
TRIGger:LIN:ICONdition................................................................................................. 677
TRIGger:LIN:IMAX......................................................................................................... 677
TRIGger:LIN:IMIN.......................................................................................................... 677
TRIGger:LIN:IPERror..................................................................................................... 678
TRIGger:LIN:SYERror.................................................................................................... 678
TRIGger:LIN:TYPE <Type>
Selects the trigger type for LIN analysis.
Parameters:
<Type> SYNC | ID | IDDT | WKFR | ERRC
SYNC
Start of the frame, triggers on the stop bit of the sync field.
ID
Sets the trigger to one specific identifier or an identifier range.
IDDT
Combination of identifier and data conditions.
WKFR
Wakeup frame.
ERRC
Error condition. Define the error types with:
TRIGger:LIN:CHKSerror
TRIGger:LIN:IPERror
TRIGger:LIN:SYERror
*RST:
SYNC
Usage: Asynchronous command
Protocols
Loading ...
Loading ...
Loading ...