Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
507User Manual 1335.5337.02 ─ 05
Parameters:
<VerticalOffset> Range: -1E+26 to 1E+26
Increment: 1E-06
*RST: 0
Default unit: V
Usage: Asynchronous command
Manual operation: See "Vertical offset" on page 190
REFCurve<rc>:OPEN
Loads the reference waveform file selected by REFCurve<rc>:NAME on page 506.
Note that reference waveforms can be loaded only from .ref files.
Suffix:
<rc>
.
1...4, index of the reference waveform
Usage: Event
Asynchronous command
Manual operation: See "Recall" on page 187
REFCurve<rc>:RESTore
Applies the original settings of the reference waveform to the horizontal and vertical
settings of the selected waveform.
Suffix:
<rc>
.
1...4, index of the reference waveform
Usage: Setting only
Asynchronous command
Manual operation: See "Restore settings" on page 188
REFCurve<rc>:SAVE
Saves the reference waveform to the file selected by REFCurve<rc>:NAME.
Suffix:
<rc>
.
1...4, index of the reference waveform
Usage: Event
Asynchronous command
Manual operation: See "Save" on page 187
REFCurve<rc>:SOURce <Source>
Selects the source waveform from the active waveforms, e.g. input channels, math
waveforms, or spectrum.
Waveform analysis
Loading ...
Loading ...
Loading ...