Loading ...
Loading ...
Loading ...
Getting Started
R&S
®
MXO 4 Series
41User Manual 1335.5337.02 ─ 05
[Multiuse]
The multiuse knob changes the element that is in focus. It lights up when a function is
active on the knob.
●
If a numeric entry field in a dialog has the focus: turn to increase or decrease the
value.
●
If a cursor set has the focus: press to toggle the cursor line, and turn to adjust its
position.
●
If a zoom has the focus: press to toggle the edges of the zoom, and turn to adjust
its position.
●
To change the intensity, press the [Intensity] key and turn the knob.
[Intensity]
Adjusts the intensity of the waveforms on the screen: Press the [Intensity] key and turn
the [Multiuse] knob. The current value is shown in the input box in the upper right cor-
ner of the screen.
[Cursor]
Starts a cursor measurement: sets vertical and horizontal cursors in the active dia-
gram, and displays results of the cursor measurement. If cursors are already set, the
keypress opens the "Cursor" dialog, where you can adjust the settings. The next key-
press closes the dialog.
Cursors are markers which are placed at points of interest on a waveform. The instru-
ment measures the cursor positions and delta values between parallel cursors.
[Measure]
Opens the "Measurement" dialog, where you can set up various measurements. If the
dialog is open, pressing the key closes the dialog.
[History]
Activates the history and opens the history player. The next keypress closes the player.
The history shows stored acquisitions that were acquired before the current one. The
key is illuminated as long as the history is active.
[HD]
Activates the high definition mode and opens the "HD Mode" dialog box.
Instrument tour
Loading ...
Loading ...
Loading ...