Loading ...
Loading ...
Loading ...
Getting Started
R&S
®
MXO 4 Series
37User Manual 1335.5337.02 ─ 05
[Slope]
Toggles the trigger slope or trigger polarity, dependent on the trigger type. The current
setting is shown on the trigger label.
[Zone]
For future use.
3.2.4.3 Horizontal controls
The rotary knobs in the Horizontal functional block adjust the horizontal parameters.
These settings are effective for all channel waveforms. In addition, a [Zoom] key is
available.
[Position]
The rotary knob changes the horizontal position of the waveforms. Turn clockwise to
move the waveforms to the right. To set the value to zero, press the knob. The current
value is shown in the "Horizontal" label above the diagram.
The horizontal position defines the zero point of the diagram. It is the time distance to
the reference point, which marks the rescaling center of the time scale.
In a spectrum diagram, the knob changes the center frequency.
Remote command:
TIMebase:HORizontal:POSition on page 427
CALCulate:SPECtrum<sp>:FREQuency:CENTer on page 560
[Scale]
The rotary knob adjusts the time scale for all signals. The time scale is also known as
timebase.
Turn clockwise to stretch the waveforms. Doing so, the scale value time/div decreases.
Press the knob to toggle between coarse and fine scale adjustment.
In a spectrum diagram, the knob changes the span.
Remote command:
TIMebase:SCALe on page 426
CALCulate:SPECtrum<sp>:FREQuency:SPAN on page 560
[Zoom]
Activates a zoom and supports the zoom setup.
Instrument tour
Loading ...
Loading ...
Loading ...