Loading ...
Loading ...
Loading ...
Measurements
R&S
®
MXO 4 Series
210User Manual 1335.5337.02 ─ 05
Figure 9-2: Absolute reference level
Level mode
Defines if the reference level is set in absolute or relative values.
Remote command:
REFLevel<rl>:LMODe on page 541
Absolute Level mode
In the absolute mode, the reference values are set as voltages, in absolute values.
Upper level, Middle level, Lower level ← Absolute Level mode
Sets the low, middle and upper reference signal levels.
Remote command:
REFLevel<rl>:ABSolute:LLEVel on page 542
REFLevel<rl>:ABSolute:MLEVel on page 542
REFLevel<rl>:ABSolute:ULEVel on page 542
Relative Level mode
In the relative mode, the reference values are set as percentages of the signal ampli-
tude.
Relative levels ← Relative Level mode
Selects the lower, middle and upper reference levels, defined as percentages of the
signal amplitude.
Available relative levels:
●
5/50/95
●
10/50/90
●
20/50/80
Automatic measurements
Loading ...
Loading ...
Loading ...