Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
439User Manual 1335.5337.02 ─ 05
AUTO
Record length is determined automatically and changes due to
instrument internal adjustments.
MANual
The waveform record length is defined with ACQuire:
POINts[:VALue].
*RST: AUTO
Usage: Asynchronous command
Manual operation: See "RL mode" on page 105
ACQuire:RESolution
<Resolution>
Defines the time between two waveform samples in the waveform record. It considers
the processing of the captured samples including interpolation. A fine resolution with
low values produces a more precise waveform record.
The resolution is the reciprocal value of ACQuire:SRATe[:VALue].
Parameters:
<Resolution> Range: 1E-15 to Device specific
Increment: 1E-11
*RST: Device specific
Default unit: s
Usage: Asynchronous command
Manual operation: See "Resolution" on page 106
ACQuire:SRATe[:VALue] <SampleRate>
Sets the number of waveform points per second in manual sample rate mode. In auto-
matic sample rate mode, it sets the minimum value of the sample rate for automatic
calculation.
The sample rate considers the samples of the ADC, and the processing of the cap-
tured samples including interpolation.
The value takes effect if ACQuire:SRATe:MODE is set to MANual.
Parameters:
<SampleRate> Range: Device specific to Device specific
Increment: 1
*RST: Device specific
Default unit: Sa/s
Usage: Asynchronous command
Manual operation: See "Sample rate, Min. sample rate" on page 105
Acquisition and setup
Loading ...
Loading ...
Loading ...