Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
714User Manual 1335.5337.02 ─ 05
Parameters:
<SignalType> SINusoid | SQUare | RAMP
*RST: SINusoid
Usage: Asynchronous command
Manual operation: See "Signal type" on page 365
WGENerator<wg>:MODulation:TYPE <ModulationType>
Selects the modulation type, which defines how the carrier signal is modified.
Suffix:
<wg>
.
1..2
Parameters:
<ModulationType> NONE | AM | FM | PWM | ASK | FSK
*RST: AM
Usage: Asynchronous command
Manual operation: See "Modulation type" on page 365
17.18.1.3 ARB settings
WGENerator<wg>:ARBGen:NAME..................................................................................714
WGENerator<wg>:ARBGen:OPEN.................................................................................. 714
WGENerator<wg>:ARBGen:RUNMode............................................................................ 715
WGENerator<wg>:ARBGen:RUNSingle........................................................................... 715
WGENerator<wg>:ARBGen:SAMPles?............................................................................ 715
WGENerator<wg>:ARBGen:SRATe................................................................................. 716
WGENerator<wg>:ARBGen[:SOURce].............................................................................716
WGENerator<wg>:ARBGen:NAME <FilePath>
Sets the file path and the file for an arbitrary waveform, if WGENerator<wg>:
ARBGen[:SOURce] is set to ARBitrary.
Suffix:
<wg>
.
1..2
Parameters:
<FilePath>
Usage: Asynchronous command
Manual operation: See "Open" on page 371
WGENerator<wg>:ARBGen:OPEN
Loads the arbitrary waveform, which is selected with the WGENerator<wg>:ARBGen:
NAME command.
Waveform generator (option R&S
MXO4-B6)
Loading ...
Loading ...
Loading ...