Loading ...
Loading ...
Loading ...
Waveform analysis
R&S
®
MXO 4 Series
187User Manual 1335.5337.02 ─ 05
Create/update
Copies the selected source waveform with all its settings to the memory of the refer-
ence waveform. If there is a previously defined reference waveform in this memory, it is
updated by the current source waveform. If the acquisition is running, the reference
waveform is a snapshot.
Remote command:
REFCurve<rc>:UPDate on page 508
Clear
The selected reference waveform disappears, its memory is deleted.
Remote command:
REFCurve<rc>:CLEar on page 506
Save
Saves the reference waveform. The complete reference waveform is stored in a REF
file and can be reloaded later. A progress bar informs you about the saving process.
If you want to save only a part of the waveform, or need CSV format, use "Menu" key >
"Save/Recall" key > "Save" tab > "Waveform".
See also:
●
Chapter 12.2, "Save and recall waveform data", on page 261
●
Chapter 12.2.3, "Waveform export files", on page 264
Remote command:
REFCurve<rc>:SAVE on page 507
To abort the saving, use REFCurve<rc>:ABORt on page 506.
Recall
Opens a file selection dialog box and loads the selected reference waveform file.
Note that reference waveforms can be loaded only from .ref files. Other formats are
meant for further processing in other applications.
Remote command:
REFCurve<rc>:OPEN on page 507
8.4.2.2 Reference waveform properties
Access: [Ref] key > "Properties" tab
Reference waveforms
Loading ...
Loading ...
Loading ...