Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
461User Manual 1335.5337.02 ─ 05
Parameters:
<ResetTimeout> Range: 0 to 50
Increment: 1E-12
*RST: 0
Default unit: s
Usage: Asynchronous command
Manual operation: See "Enable reset by time, Reset timeout" on page 138
TRIGger:MEVents:SEQuence<se>:RESet:TIMeout[:ENABle] <State>
If set to ON, the instrument waits for the time defined using TRIGger:MEVents:
SEQuence<se>:RESet:TIMeout:TIME for the specified number of B-events. If no
trigger occurs during that time, the sequence is restarted with the A-event.
Suffix:
<se>
.
Irrelevant, omit the suffix.
Parameters:
<State> ON | OFF
*RST: OFF
Usage: Asynchronous command
Manual operation: See "Enable reset by time, Reset timeout" on page 138
17.9.3 Edge trigger
TRIGger:EVENt<ev>:EDGE:SLOPe.................................................................................461
TRIGger:ANEDge:LEVel................................................................................................. 462
TRIGger:ANEDge:COUPling........................................................................................... 462
TRIGger:ANEDge:FILTer................................................................................................ 462
TRIGger:ANEDge:CUToff:HIGHpass................................................................................462
TRIGger:ANEDge:CUToff:LOWPass................................................................................ 463
TRIGger:ANEDge:NREJect.............................................................................................463
TRIGger:EVENt<ev>:EDGE:SLOPe <Slope>
Sets the edge direction for the trigger.
Suffix:
<ev>
.
1 = A-trigger, 2 = B-trigger, 3 = reset event
Parameters:
<Slope> POSitive | NEGative | EITHer
*RST: POSitive
Usage: Asynchronous command
Manual operation: See "Slope" on page 139
Trigger
Loading ...
Loading ...
Loading ...